Russell Hobbs Descaler 21220, 250 ml

Product Information

To prevent shine/print, avoid ironing over uneven surface or use a piece of cotton over the surface during ironing. What causes the noise in the steam generator when I press the steam trigger? Is this noise normal? This kettle is equipped with boil-dry protection. The kettle will automatically switch off if it is accidentally switched on when there is no water or not enough water in it. It is also common for the initial burst of steam to be higher and it tapers off to a steady level with continuous triggering of the steam trigger. The water in this kettle is heated up rapidly, which causes the noise. This is a normal phenomenon and there is nothing wrong with your kettle. How can I clean the outside of the kettle?

Regularly descaling your kettle will help to: reduce the boiling time and save energy, keep the inside of the kettle clean and extend the kettles life. This noise is caused by movement of the valve that lets steam pass from the steam generator to the iron each time when the steam trigger is pressed. This sound is normal. I hear noise coming out of the steam generator during ironing. Is this normal? It is normal to hear occasional pumping sounds coming out of the steam generator when water is pumped from the water tank into the steam generator. Water droplets appear on the garment during ironing First, shut off your vacuum and unplug its cord. It's not difficult to replace the belt as long as you have a screwdriver and a replacement belt.When you have switched the appliance off, wait until the blade has stopped turning completely before opening the lid. In case you live in an area with very hard water, fast scale build-up may occur. Therefore, it is recommended to mix 50% distilled water and 50% tap water, or to use only distilled water to prolong the lifetime of your appliance.

Loosen the ingredients with a spatula (switch the appliance off before doing so). How long is the processing time for blending? Increase the speed of blending gradually, instead of starting the appliance at the highest speed. The blender jar leaks. What should I do?

Frequently Asked Questions

Try descaling the kettle according the descale procedure, as this removes most smells. Rinse carefully afterwards. The water tank is detachable. Detach it, and fill the water tank under the tap. You may fill the water tank any time during ironing. How to avoid the iron leaving shine/ print on my garment during ironing? Yes, still mineral water is fine but do not use sparkling water. Why does the coffee come out so slowly?

Also, don't forget to periodically turn the rug over so you can vacuum its underside. Is it bad for my carpet or vacuum to use powder fresheners A retailer may sell the products at a higher or lower price than the price listed in our Online Shop.No, to avoid damage to the jar let the liquid cool down to the sort of temperature you can comfortably handle, i.e. liquid temperature below 40°C. Can I process hot ingredients? The coffee might have stayed on the hot plate too long. Coffee becomes strong and bitter if you leave it on the hot plate for too long, especially if the jug contains only a small quantity of coffee.

Also, if there is remaining water in the soleplate from the last usage, the smoke observed may actually be water evaporating. However, these will stop after a short while. The soleplate coating is scratched/worn away. Let the appliance run at maximum speed for a longer period of time or use the pulse function (not all models have this) several times. Sometimes liquid ingredients splash out of the jar. What should I do? Set the control knob to 0 and pour out the ingredients. Make sure that the sealing ring is properly in place on the blade unit.

Yes you can toast bagels (some of our toaster have bagel feature) and other bread types). How do I clean my toaster? Regularly descaling your kettle will help to pro long the life of your kettle, keep the inside of the kettle clean and reduce boiling times which will then reduce energy consumption. Can I throw away my kettle with the normal household waste at the end of its life?